Chainsaw depth gauge chart how to#
Chainsaw depth gauge chart full#
Chainsaw depth gauge chart professional#

If you find that the cutters in one row are shorter than those in the other row, you are likely to have used more pressure while filing the row concerned.Count the number of file strokes and use the same number on each cutter to obtain cutters of identical length.

Chainsaw depth gauge chart full#

A few strokes of the file at regular intervals quickly restores full sharpness Never continue working with a chain until it is completely blunt.Tensioning the chain will make it easier to file.Marking your 1 st tooth with a black marker it aslo a great way to remember where you started.If there are still patches of colour in places, check that you are using the right file and make sure you are not holding the file too high or low If the surface looks uniform your filing action is correct. After two or three strokes of the file, check how much material has been removed. Before you start sharpening, mark one cutter with a marker pen.They have a special surface structure, known as a file stroke, that makes them the right tool to sharpen your Chains Saw Chain files are specifically designed to sharpen Saw Chains. Do not attempt to sharpen your Chainsaw with any files other than a Saw Chain file.

Chainsaw depth gauge chart how to#

HOW TO SHARPEN YOUR CHAINSAW: EXPERT TIPS AND TRICKS Stihl Clothing & Merchandise & Toys Back.Cordless Battery & Electric Leaf Blowers.Cordless Battery & Electric Hedge Trimmers.In this section, there is a chart that shows the gauge and pitch ratings that correspond to chain markings used by. This number is found by measuring the part of the drive link that’s inserted into the chainsaw’s guide bar. Chain Markings (Oregon, Husqvarna, Carlton). Chainsaws, Pole Chainsaws & Accessories Back The gauge of a chainsaw chain refers to the thickness of its drive links.Chainsaws, Pole Chainsaws & Accessories.

Chainsaw depth gauge chart professional#

Professional Line Trimmers & Brushcutters Obviously, it is important to match the right chain gauge to the saw so that the chain will fit into the guide bar correctly.

Cordless Battery & Electric Line Trimmers & Brushcutters.

STIHL Battery Electric Tools & Accessories Back.

STIHL Battery Electric Tools & Accessories.

This will result in the chain biting too deeply, which increases the risk of kickback, excessive vibration and poor accuracy. Warning: If you file the rakers without a gauge you might file them down too far.

The gauge has two positions: H for hard species of wood or frozen timber, and S for soft species of wood. Lay the raker gauge on the chain and use the flat file to file each raker flush with the gauge. A tip: If you have secured the bar in a vice it is easier to file every second tooth from one side, then turn the saw around and file the rest from the other side. File every second tooth from the right, and those in between from the left. File the tooth using light, regular pushing strokes, at an angle of about 30 degrees to the bar.įile each tooth the same number of strokes. The arrows on the gauge should point in the chain’s direction of rotation. The raker should be about 0.50.8 mm lower than the cutter. This height difference controls how deep the cutter bites into the wood. Then, press the file guide so it rides on both cutter top plate and depth gauge, with guide marks in line with the length of the chain. The effectiveness of the chain is determined by the difference in height between the cutter (1) and the raker (2). Secure the bar so you have both hands free.Įach link in the saw chain works rather like a miniature plane.

Your Jonsered dealer has everything you need. You will need a round file, a flat file, and a combination file gauge that fits your chain.

A sharp chain produces fine, regular wood chips, while a blunt chain just produces sawdust. The appearance of the chips gives a good indication of the chain’s condition. How often should you sharpen the chain? This depends on how much you use the saw, but when the chain starts to seem blunt it is usually time to sharpen it. Professional loggers sharpen their chains several times every working day, because they know that a sharp chain is just as important as a powerful engine. It is recommended that you learn how to sharpen the chain yourself. The saw chain must be kept sharp in order to cut efficiently, safely and with accuracy.